405/5000 Kiitos kysymyksestäsi. Kyllä, JBL Tuner 2: lla on myös käynnistys- ja sammutusäänet. Valitettavasti näitä ei voida poistaa käytöstä tai muuttaa. Jos haluat saada lisätukea, voit ottaa yhteyttä Harmanin asiakastukitiimiin puhelimitse, sähköpostitse tai chatissa saadaksesi suoraa apua. Katso lisätietoja osoitteesta https://fi.harmanaudio.com/support-contact.html#ns. Kiitos.

Thank you for your question regarding JBL Tuner 2. If you are interested in the EU directives affecting this item, please download the EU Conformity Declaration Document on the JBL Tuner 2 product page. This document lists references to all relevant harmonised standards used or references to the other technical specifications in relation to which conformity is declared. For further support, we welcome you to contact our JBL Customer Support team: https://support.jbl.com/fi/fi/

Thank you for your question. On the basis of the information provided, I recommend that you try the following: Reset to factory default - Long press Preset 1 & Bluetooth buttons for more than 10 seconds. If this advice does not help you to solve the problem, we invite you to contact the Harman Customer Support team by telephone, email or chat in order to receive direct assistance. Please see https://uk.harmanaudio.com/support-contact.html#ns for further details. ​​​​​ Thank you.

Thank you for your question. Our development team just released a software update made to resolve the issue with the Tuner 2. One of our Live Agents will reach out directly to you and will provide you with all information necessary for the update Should you have any further question or query, please do not hesitate to see https://uk.harmanaudio.com/support-contact.html#ns for further details. Thank you.

Thank you for your question. One of our Live agents will be in touch with your shortly to provide further support. Should you wish to receive further support, you may contact the Harman Customer Support team by telephone, email or chat in order to receive direct assistance. Please see https://uk.harmanaudio.com/support-contact.html#ns for further details. Thank you.

Thank you for your question. It is not possible to connect headphones to the JBL Tuner 2 either via Bluetooth or wired via AUX. Should you wish to receive further support, you may contact the Harman Customer Support team by telephone, email or chat in order to receive direct assistance. Please see https://uk.harmanaudio.com/support-contact.html#ns for further details. Thank you.

Thank you for your question. Unfortunately, this is not possible as it is an EU Regulation. Should you wish to receive further support, you may contact the Harman Customer Support team by telephone, email or chat in order to receive direct assistance. Please see https://uk.harmanaudio.com/support-contact.html#ns for further details. Thank you.

Thank you for your question. Sadly, it is not possible to connect your JBL Tuner 2 with your JBL Flip 4 either wireless or wired. Should you wish to receive further support, you may contact the Harman Customer Support team by telephone, email or chat in order to receive direct assistance. Please see https://uk.harmanaudio.com/support-contact.html#ns for further details. Thank you.

Thank you for your question. We advice you to perform a reset of your Tuner 2. Please press number 1 and the Bluetooth button for 10 seconds while it is switched on. After this, should you still be unable to scan for stations, we invite you to contact the Harman Customer Support team by telephone, email or chat in order to receive direct assistance and troubleshooting. Please see https://fi.harmanaudio.com/support-contact.html for further details. Thank you.

Thank you for your question. Charging the JBL Tuner 2, requires 5V, 1.2A charging cable, in addition we can only advise using AC not DC Should you wish to receive further support, you may contact the Harman Customer Support team by telephone, email or chat in order to receive direct assistance. Please see https://uk.harmanaudio.com/support-contact.html#ns for further details. Thank you.

Dear customer, Thank you for contacting Harman Customer Service. I am sorry to hear that you are experiencing DAB signal problems with your TUNER 2. Based on the information you have provided, I suggest you try the following: Setup: Try turning your radio on and off. If this does not work, a complete re-scan may be necessary. See the manual for specific instructions on how to perform the scan. Built-in antennas Make sure the telescoping/integrated antenna is fully extended. Try moving the radio around to see if you can find a better position where you get good reception of all the stations you want to listen to. In most cases, the supplied telescoping antenna should be perfectly suited for outdoor or nearby use. If your radio reception is poor, you may want to consider an external antenna for better reception quality. Even in good areas, an external antenna will ensure optimum performance and also provide consistent listening quality. Please note that not all products allow the connection of external antennas. External antennas If you have an external antenna, a radio signal will always lose some of its strength as it passes along the cable and through the connectors. It is important to minimize the losses by using good quality cables and connectors. Make sure that all cables between your radio equipment and the antenna are properly connected. The antenna must be designed for DAB reception - universal antennas may not be tuned/calibrated for the frequency band. Most problems are not caused by "interference" sources. Interference is rare and often mistaken for a reception problem. If the problem persists for some time, it is probably a reception problem, not interference. If it happens intermittently, but your reception is otherwise good and it affects your neighbors' reception at the same time, it is more likely to be interference. If the sound starts to crackle or cut out completely, or if you have lost a radio station, it may be due to one of the following reasons: - There is a defect in the transmitter. - You are in an area with poor signal coverage. - The positioning of the radio and/or the telescopic antenna needs to be adjusted. - A cable or connector is damaged or has become disconnected. - A problem with your antenna installation. - Your unit needs to be readjusted. - A source of interference. National and local radio services Large DAB service providers often group their stations into a national multiplex. Although these usually include national stations, specific local channels may be broadcast via a different transmitter. For example, a private commercial multiplex. This can lead to local and national services having different coverage. I hope this helps you to solve the problem. If you need further assistance, please contact us back in the the following link: https://support.jbl.com/gb/en/ Sincerely, Jesus EMEA Customer Service Harman Lifestyle Division

Thank you for your question. Could you please open a case on https://support.jbl.com/gb/en/ and one of our Customer Support Team will be happy to assist you with the firmware update for your JBL Tuner 2. Thank you.

Thank you for your question. Indeed, your JBL Tuner 2 has the latest firmware. Should you wish to receive further support, you may contact the Harman Customer Support team by telephone, email or chat in order to receive direct assistance. Please see https://uk.harmanaudio.com/support-contact.html#ns for further details. Thank you.